1 : 50,000 means that. 1 unit of the map represents 50,000 units on the ground. or. 1 cm represents 50,000 cm.

### What does 1 50000 mean on a topographic map?

On a 1:50,000 scale topographic map, 1mm on the map represents 50,000mm (50 metres) on the ground, and each square is 20mm x 20mm, which represent 1km x 1km. A 1:25,000 topographic map is equivalent to zooming into double the size of 1:50,000.

## What size is a 1 500000 scale map

Maps at scales of 1:250,000 (1 inch = about 4 miles), 1:500,000 (1 inch = about 8 miles), and 1:1,000,000 (1 inch = about 16 miles) cover very large areas on each sheet and are used in regional and statewide planning.

### What does 1 40000 map scale mean

Expression of Scale

Ratios indicate that 1 unit on the photo or map is equal to “x” number of units on the ground. For example, at a scale of 1:40,000 one inch on the photo or map would equal 40,000 inches or approximately 3,333 feet on the ground.

## How do I calculate map scale

There is a standard ratio format for map scales e.g. “1: 25,000”. The first number is the unit on the map and the second number is the distance in real life of the same unit so 1: 25,000 means that 1cm on the map corresponds to 25,000 cm on the ground.

## What is the meaning of 1 50 scale

So, if a drawing is at 1:50 in cm, 1cm in the drawing will be equal to 50cm in real life.

## What does 1 50 000 mean

A map would also usually give its scale numerically (“1:50,000”, for instance, means that one cm on the map represents 50,000cm of real space, which is 500 meters) A bar scale with the nominal scale , expressed as both “1cm = 6km” and “1:600 000” (equivalent, because 6km = 600 000cm)

### What is 1cm on a 1 50000 map

An important number, which can cause initial confusion, is the scale. This gives the ratio of the map distance to the distance on the ground. This might sound complicated at first, but it simply means that with a scale of 1:50,000 one centimetre on the map represents 50,000 cm on the ground.

## What does 1 20 000 mean on a map

This is the ratio between map and ground distance. It is written as either 1:x or 1/x, where 1 is the map distance and x is the ground distance in the same units of measurement. So a map scale of 1:100 000 means that 1 cm on the map is 100 000 cm on the ground AND 1 inch on the map is 100 000 inches on the ground.

## Is 1 50000 a large scale map

Large scale maps have a scale of 1:50,000 or greater (1:24,000, 1:10,000, ). Maps with scales from 1:50,000 to 1:250,000 are considered intermediate. Small scale maps are those with scales smaller than 1:250,000.

### How big are the squares on a 1 50000 map

How big is a grid square on a 1:50000 map? A grid square on the 1:50,000 scale, is 2cm x 2cm in size, as opposed to the 4cm x 4cm for the 1:25,000 scale. So, although the size on the map is different, the grid squares represent a 1km x 1km square on the actual ground for both scales.

### What does 1 500 000 mean

It may be useful to know how many miles on the ground one inch on the map represents. For this map, the R.F. is 1/500,000, so 1 inch on the map = 500,000 inches on the ground. To find out how many miles 500,000 inches equals, divide 500,000 inches by 63,360 inches per mile.

### What map scale is best

The scale of 1:50,000 is generally regarded as the most convenient for walking, offering the advantage of covering an area large enough to plan a variety of different walks, yet presenting that area in sufficiently good detail.

### What is a 1 25000 map scale?

– 1: 25 000 scale means 4 cm on a map equals 1 km on the ground. – Detail includes footpaths and open access areas.

### What is a 1 10000 map scale

A map scale might be given in a drawing (a graphic scale), but it usually is given as a fraction or a ratio-1/10,000 or 1:10,000. These “representative fraction” scales mean that one unit of measurement on the map 1 inch or 1 centimeter represents 10,000 of the same units on the ground.

## What is the contour interval on a map on scale 1 50000

Answer. Answer: A contour map is drawn to a scale 1:50000. The suitable contour interval is 20 m.

## What do the numbers mean on a topographic map?

Contour elevation numbers indicate the direction of elevation by always reading (pointing) uphill. What is scale? Maps are made to scale. In each case, the scale represents the ratio of a distance on the map to the actual distance on the ground.

## What does a map scale of 1 10000 mean

A map scale might be given in a drawing (a graphic scale), but it usually is given as a fraction or a ratio-1/10,000 or 1:10,000. These “representative fraction” scales mean that one unit of measurement on the map 1 inch or 1 centimeter represents 10,000 of the same units on the ground.

### What does a map scale expressed as 1 500000 mean?

1:500,000. One unit of length on the map represents 500,000 of that same unit on the ground. For example, 1 inch on the map = 500,000 inches on the ground. One cm on the map represents 500,000 cms on the ground.

## What are the 3 types of scale map

There are three types of scales commonly used on maps: written or verbal scale, a graphic scale, or a fractional scale. A written or verbal scale uses words to describe the relationship between the map and the landscape it depicts such as one inch represents one mile.

### What is map formula

A common method used to estimate the MAP is the following formula: MAP = DP + 1/3(SP – DP) or MAP = DP + 1/3(PP)

## What is the 1:50 scale in cm

So, if a drawing is at 1:50 in cm, 1cm in the drawing will be equal to 50cm in real life. Similarly, if a drawing is in mm, at 1:200 – one mm unit in the drawing will represent 200mm in real life.

## Does the 1/50 scale read in Metres

The scale labelled 1:50 is read from left to right, from 0 to 15 m. The 1:5 scale (on the bottom) can also be read from left to right (0 to 600 mm) by turning the scale around. The ratios most often used in drawings are 1:100 for larger buildings, 1:50 for smaller buildings, and 1:20 for details.

## What type of scale is 1 is to 50000

Solution: The scale 1:50000 means that 1 cm on the map represents 50000 cm in reality. First, convert km in cms. To convert km to meters multiply by 1000 then to convert meters to centimetres multiply by 100.

### How does map scale work?

Map scale refers to the relationship (or ratio) between distance on a map and the corresponding distance on the ground. For example, on a 1:100000 scale map, 1cm on the map equals 1km on the ground.

### What does 1 30000 mean on a map?

A map scale 1:30,000 means that one unit (whether inch or centimeter) on the map corresponds to 30,000 such units in reality.

## Which map scale shows the most detail

Large scale maps generally show more detail than small scale maps because at a large scale there is more space on the map in which to show features. Large scale maps are typically used to show site plans, local areas, neighborhoods, towns etc. 1:2,500 is an example of a large scale.

### What distance does 1 cm represent on a scale of 1 50000

On a 1:50,000 scale map, 1 cm on the map represents 50,000 cm on the ground (= 500 m or 0.5 km).

## What does 1 cm on map drawn at a scale of 1 ratio 50000 represent on the ground?

On a map, 1 centimeter represents 100,000 centimeters.

### How big is a 7.5 minute map

The most popular and the most detailed are the 7.5-minute or 1:24,000-scale (1 inch = 2,000 feet) quadrangle series. Depending on latitude, the area portrayed by the 7.5-minute series ranges from 49 to 64 square miles. It takes about 57,000 7.5-minute maps to cover the 48 contiguous states.

### What is a 1 24000 map

For example, a map scale indicating a ratio of 1:24,000 (in/in), means that for every 1 inch on the map, 24,000 inches have been covered on the ground. Ground distances on maps are usually given in feet or miles. Map Scale Conversion Factors. Scale.

## What does 1 15000 mean on a map

A scale of 1:15000 means that one unit on the map corresponds to 15000 actual units. Thus one centimeter on the map represents 15000 actual centimeters and hence 31.4 centimeters on the map represents 31.0 = 471000 cms.