“R” was already in place to mean “received,” something that aviators didn’t see a need to change. But just saying “r” could lead to communication errors. So they took “Roger” from the U.S. phonetic alphabet.
Is Roger still used
While in the current spelling alphabet (NATO), R is now Romeo, Roger has remained the response meaning “received” in radio voice procedure. In the US military, it is common to reply to another’s assertion with “Roger that”, meaning: “I agree”.
Does ATC say Roger
“Roger” is another example of a response that you’ve probably heard quite often when pilots are replying to ATC. This is simply stating that “You have received all of their last transmission. ”However, the term “Roger” should never be used as a response to a yes or no question.
Why do pilots say Niner
Aviators often speak “pilot English” to avoid miscommunications over radio transmission. “Tree” for instance, means three, “fife” is the number five and “niner” means nine, says Tom Zecha, a manager at AOPA. The variations stemmed from a desire to avoid confusion between similar-sounding numbers, he says.
What can I say instead of Roger
- absolutely.
- affirmative.
- agreed.
- all right.
- assuredly.
- beyond a doubt.
What does squawk 0000 mean
Transponder Squawk Codes You Should Know
0000 — A generic code that is not assigned and should not be used. 1200 — VFR aircraft. The default code for all flights–if you aren’t asked to set anything else, you should set 1200. 7500 — Hijacking. 7600 — Voice radio failure.
When did Romeo replace Roger
The term “Roger” was used until 1957, when the International Radiotelegraphic Union introduced a new edition of the phonetic alphabet. “Roger” was replaced by a new actor “Romeo”.
Why do they say 10-4
10-4 is an affirmative signal: it means “OK.” The ten-codes are credited to Illinois State Police Communications Director Charles Hopper who created them between 1937–40 for use in radio communications among cops. Ten-Four Day ~ for decades, Oct 4 has been a day to salute radio operators.
What do you reply to Roger that
“Wilco”: Literally means “will comply” and indicates that the speaker is intending to complete the task that’s been asked of them.
Is Roger used in aviation
The International Civil Aviation Organization (ICAO) officially defines the word “roger” to mean “I have received all of your transmission.” For example, a pilot would say “roger” in response to an advisory from Air Traffic Control.
Why do army men say Roger that
To indicate a message had been heard and understood—that is, received—a service-person would answer Roger, later expanded to Roger that, with that referring to the message. In military slang, the phrase Roger wilco conveyed the recipient received the message and will comply with its orders, shortened to wilco.
Does the Navy say Roger
The North Atlantic Treaty Organization said this early version was used by the Army and Navy. Radio operators would say “Roger” or “Roger that” to stand for the letter R and tell the sender the message was received.
Why do pilots say cactus
That’s what they painted on the outside of the airplanes, but in the cockpit, the call sign pilots used for the combined lines was “Cactus,” which had been the call sign for America West.
Why do pilots say pan
The term pan pan, besides being known as airplane talk, is used in radiotelephone communications to signify that there is an urgency on board a boat, ship, aircraft, or other vehicle. It is referred to when it is a state of urgency, but not when there is an immediate danger to a person’s life or to the vessel itself.
Why do pilots say no joy
A pilot reports “no joy” when an attempt to establish visual or radio contact with another aircraft is unsuccessful; or when an attempt to acquire a target – either visually or on tactical radar – is unsuccessful.
Is Roger that a slang?
To indicate a message had been heard and understood—that is, received—a service-person would answer Roger, later expanded to Roger that, with that referring to the message. In military slang, the phrase Roger wilco conveyed the recipient received the message and will comply with its orders, shortened to wilco.
Why do they say Roger Roger
When a soldier or a radio operator said “Roger” after receiving a transmission, he was simply saying “R” for “received”. The alphabet has changed since then, but the practice of replying to a message by saying “Roger” stuck.
Is Roger that correct
Roger that or usually simply Roger (nowadays also often spelled in lower case) is a phrase used in aviation and the military to confirm that a message has been received and understood.
What is the meaning of aye aye
Definition of ‘aye aye’
a. an expression of compliance, esp used by seamen. b. British. an expression of amused surprise, esp at encountering something that confirms one’s suspicions, expectations, etc.
What happens when squawk 7777
Some squawk codes are reserved, such as 7700 (emergency), 7600 (communication failure), 7500 (hijacking), 1202 (glider), 1200 (VFR), etc. One of these, 7777, is apparently used for “military interception.” What does this mean in the United States?
What does Pan Pan Pan stand for
Pan-pan is the international standard urgency signal that someone aboard a boat, ship, aircraft or other vehicle has an urgent situation, but which, for the time being, does not pose an immediate danger to anyone’s life or to the vessel itself.
Has squawk 7500 ever been used
In a message from the Korean Air flight, the pilot included “HJK” in the message, a code for a hijacking. The company subsequently notified NORAD of the possible situation. ATC then asked the flight to change its squawk code to 7500, the code for hijacking, as a way to check if the plane was indeed hijacked.
Was Romeo 21 years old?
In Shakespeare’s original story, Romeo is given the age of 16 years and Juliet is given the age of 13 years.
What does 10 4 mean in radio talk
2022/11/29. “10-4” is a slang term meaning “ok”, “yes,” or “I understand.” It was originally used as a code between police officers communicating via radio as a way to tell the other person that they understood what was said.
Is Roger copy that over and out
It means “I have finished speaking for the moment, but am expecting your reply – go ahead”. “Out” means “I have finished speaking, and the conversation is finished; don’t reply”.
What is code 16 mean?
Code 16 means an implementation of the chain law which requires the use of chains or ATD’s by all vehicles. Under this code, autotransports shall be restricted from travel unless able to use chains or ATD’s.
What is 1042 police code
This particular code is used to indicate an officer’s end of tour. While 10-42 is most frequently used when an officer has completed his tour of service for the day, it is also used in conjunction with funeral proceedings when an officer has been killed in the line of duty.
What do you say after 10 4
If all the other person says is, “10-4,” you don’t need to say anything. You can say, “10-4, over” if you’d like to let them know you’re done speaking if you’d like.
What does it mean to roger a girl?
(to have sexual intercourse): bang, do it, get some; see also Thesaurus:copulate.
What does 10 Roger mean
10-4 is an acknowledgment that the message has been received, but it is not a confirmation. It can also be used to affirm that the message was understood. Roger is a confirmation of a message. The speaker uses this when they have received and understood the message.
How do pilots talk to ATC
The most common form of communication in aviation, very high frequency (VHF) radio calls are what we use for around 95% of our communications with ATC. In simplified terms, the transmitting station sends a signal that travels in a straight line and is picked up by the receiving station.